What Does a Level 2 Chimney Inspection Include — and When Do You Need One?
A Level 2 chimney inspection is required when selling a home, after a chimney fire, or after any significant event. Here is exactly what it covers and why it matters.
If you have been told you need a "Level 2 chimney inspection," you may be wondering what that means — and why it is different from a standard chimney sweep. The answer matters, because a Level 2 inspection is required in specific situations, and skipping it can have real consequences for your safety, your home sale, or your insurance claim.
Here is everything you need to know.
The Three Levels of Chimney Inspection
The National Fire Protection Association's NFPA 211 — the standard that governs chimneys, fireplaces, and venting systems — defines three levels of chimney inspection. Each level is appropriate for different circumstances.
Level 1: Standard Annual Inspection
A Level 1 inspection is the baseline — what should happen every year as part of routine chimney maintenance. It covers all readily accessible portions of the chimney exterior and interior, including the firebox, damper, smoke chamber, and the visible portion of the flue.
A Level 1 inspection does not require specialized tools or equipment. It is a visual examination of what can be seen without moving furniture, removing components, or accessing areas that require special equipment.
When it is appropriate: Annual maintenance when there have been no changes to the system and no unusual events.
Level 2: Enhanced Inspection with Camera
A Level 2 inspection includes everything in a Level 1, plus a video camera scan of the entire flue from top to bottom. The camera allows the inspector to see the full interior of the flue liner — including areas that cannot be seen with the naked eye — and document the condition of the liner, any cracks or deterioration, and any blockages.
A Level 2 inspection also includes accessible portions of the chimney exterior that may require accessing the roof.
When it is required: NFPA 211 mandates a Level 2 inspection in specific circumstances (detailed below).
Level 3: Invasive Inspection
A Level 3 inspection is reserved for situations where a serious hazard is suspected and cannot be confirmed without removing portions of the chimney structure. It may involve removing chimney components, opening walls, or other invasive procedures.
When it is appropriate: Only when a Level 2 inspection has identified a suspected serious hazard that cannot be confirmed otherwise. Level 3 inspections are relatively rare.
When Is a Level 2 Inspection Required?
NFPA 211 is specific about when a Level 2 inspection is required. The standard mandates a Level 2 in the following situations:
When Selling or Buying a Home
This is the most common trigger for a Level 2 inspection in Bucks County. NFPA 211 requires a Level 2 inspection "upon the sale or transfer of a property." This means:
- Sellers should have a Level 2 inspection before listing to avoid surprises during the buyer's home inspection
- Buyers should request a Level 2 inspection as part of their due diligence — a standard home inspection does not include a camera scan of the flue
Many real estate agents in Bucks County now routinely recommend Level 2 inspections as part of the transaction process. For more on the real estate angle, see our guide to chimney inspections when buying or selling and our page for real estate professionals.
After a Chimney Fire
A chimney fire — even a small one — can crack flue tiles, damage mortar joints, and compromise the structural integrity of the chimney in ways that are not visible from the firebox. A Level 2 inspection after any chimney fire is mandatory before the fireplace is used again.
This applies even if the chimney fire seemed minor. Many chimney fires go unnoticed — they burn slowly inside the flue without the dramatic roaring sound associated with larger fires. If you have any reason to suspect a chimney fire has occurred, stop using the fireplace and schedule a Level 2 inspection immediately.
After Changing the Heating Appliance
If you replace your furnace, boiler, or fireplace insert with a different appliance — particularly one with different venting requirements — a Level 2 inspection is required to verify that the existing chimney or venting system is appropriate for the new appliance.
This is especially relevant in Bucks County, where many homeowners are converting from oil heat to gas or adding a gas fireplace insert to an existing wood-burning fireplace. The flue sizing, liner condition, and venting configuration that worked for one appliance may not be appropriate for another.
After Any Significant Event
NFPA 211 also requires a Level 2 inspection after any event that may have affected the chimney's structural integrity, including:
- Earthquake or seismic activity
- Lightning strike
- Severe weather — high winds, hail, or flooding that may have damaged the chimney exterior or allowed water intrusion
- Building fire — even if the chimney itself was not directly involved
What a Level 2 Inspection Covers
A thorough Level 2 inspection from Aspen Chimney Service includes:
Exterior inspection:
- Chimney crown condition (cracking, deterioration)
- Chimney cap presence and condition
- Flashing condition and seal at the roofline
- Mortar joint condition on all accessible exterior surfaces
- Brickwork condition — spalling, cracking, efflorescence
Interior inspection (firebox and smoke chamber):
- Firebox walls and floor condition
- Damper operation and condition
- Smoke shelf condition and debris accumulation
- Smoke chamber condition
Flue camera scan:
- Full video scan of the flue liner from top to bottom
- Documentation of any cracks, gaps, or deterioration in the liner
- Identification of any blockages, animal intrusion, or debris
- Assessment of liner type (clay tile, stainless steel, cast-in-place) and condition
Written report:
- Documented findings with photographs and video stills
- Clear assessment of the chimney's condition
- Specific recommendations for any repairs required
- Suitable for real estate disclosure packages and insurance documentation
What Happens If Problems Are Found
If a Level 2 inspection reveals issues, the findings fall into two categories:
Safety hazards — conditions that make the chimney unsafe to use, such as a cracked flue liner, a collapsed tile, or a blocked flue. These require repair before the chimney is used again.
Maintenance items — conditions that should be addressed but do not pose an immediate safety risk, such as minor mortar deterioration or a damaged chimney cap. These can typically be scheduled at your convenience.
We explain every finding clearly, show you the camera footage, and give you a written report. We do not pressure you to make decisions on the spot.
Schedule Your Level 2 Inspection
Aspen Chimney Service has been performing Level 2 chimney inspections in Bucks County since 1995. We serve Levittown, Langhorne, Bristol, Yardley, Newtown, Morrisville, Doylestown, Warminster, Horsham, Hatboro, Willow Grove, and surrounding communities.
Our inspection fee is $150 flat, seven days a week, 8 AM to 8 PM. Call (215) 771-5034 or schedule online.
Related reading: Do I need a chimney sweep before selling my home? · What to do after a chimney fire · 5 signs your chimney needs repair
Explore Topics
Written by
Aspen Chimney Service
Content creator and writer sharing insights and stories.