Chimney Cap vs. Chimney Cover: What's the Difference?
The terms are often used interchangeably — but they are not the same thing. Here is what each one does, why your chimney needs one, and what happens if it is missing.
Walk through any Bucks County neighborhood and look at the chimneys. Some have a metal cap sitting on top. Some have a larger cover that spans the entire chimney top. Some have nothing at all.
The terminology gets confusing because "chimney cap" and "chimney cover" are often used interchangeably — even by professionals. Here is a clear breakdown of what each term means, what each one does, and why your chimney needs one.
The Chimney Cap
A chimney cap is a small metal cover that sits directly over the flue opening at the top of the chimney. It typically consists of a flat or slightly domed metal top with mesh sides, mounted on a base that fits over or inside the flue tile.
What a chimney cap does:
Keeps rain out of the flue. Water is one of the most destructive forces a chimney faces. Rain that enters an uncapped flue soaks into the flue liner, the mortar joints, and the masonry. Over time, this causes cracking, spalling, and deterioration that can cost thousands of dollars to repair. A chimney cap is the simplest and least expensive way to prevent water damage.
Keeps animals out. Birds, squirrels, and raccoons are drawn to uncapped chimneys as nesting sites. A nest in the flue is a blockage — and a blocked flue means combustion gases, including carbon monoxide, back up into your home instead of venting outside. A chimney cap with mesh sides prevents animal intrusion entirely.
Prevents downdrafts. A properly designed chimney cap reduces wind-driven downdrafts — the gusts of cold air that push down the flue and into the firebox. This improves draft performance and keeps cold air out of the home.
Catches sparks. The mesh sides of a chimney cap act as a spark arrestor, catching burning embers before they can land on the roof or nearby combustibles.
What a chimney cap does not do:
A standard chimney cap covers only the flue opening — not the entire chimney top. The chimney crown (the concrete or mortar surface that surrounds the flue tile at the top of the chimney) is still exposed to weather. Water can still penetrate the crown and work its way into the masonry.
The Chimney Cover (Chase Cover)
A chimney cover — also called a chase cover — is a larger metal cover that spans the entire top of the chimney, covering both the flue opening and the surrounding chimney top surface.
Chase covers are most commonly found on prefabricated (factory-built) metal fireplaces, where the chimney is enclosed in a wood-framed "chase" rather than built from masonry. The chase cover sits on top of the chase and protects the entire structure from water intrusion.
What a chimney cover does:
Everything a chimney cap does, plus:
Protects the entire chimney top. A chase cover eliminates the exposed chimney crown entirely, providing comprehensive water protection for the full chimney top surface.
Prevents water intrusion into the chase. On prefabricated fireplace systems, water that enters the chase can damage the metal firebox components, the framing, and the surrounding structure. A properly fitted chase cover prevents this.
Chase cover deterioration — a common Bucks County issue
Many Bucks County homes built in the 1970s and 1980s have prefabricated fireplaces with original galvanized steel chase covers. These covers rust over time — often within 15 to 20 years — and once rust sets in, they allow water to penetrate the chase rather than shedding it.
A rusted chase cover is one of the most common findings on prefabricated fireplace systems in this area. Replacement with a stainless steel or aluminum cover is a straightforward repair that prevents significant water damage to the chase interior.
Does Your Chimney Have One?
The easiest way to check is to look at your chimney from the ground or from a window with a view of the roofline. If you can see the flue tile exposed at the top with no cover, your chimney has neither a cap nor a cover.
If you see a small metal cover over just the flue opening, you have a chimney cap.
If you see a larger metal cover spanning the full chimney top, you have a chase cover.
If you are not sure — or if you want to know whether what you have is in good condition — a chimney inspection will answer both questions. We inspect the chimney cap or chase cover as part of every visit.
What Happens Without One
A chimney without a cap or cover is exposed to:
- Water damage — the leading cause of chimney deterioration and one of the most expensive repairs
- Animal intrusion — nests that block the flue and create carbon monoxide risk
- Debris accumulation — leaves and debris that restrict draft and create fire hazards
- Accelerated liner deterioration — water in the flue attacks clay tile liners and mortar joints
The cost of a chimney cap or chase cover is modest — typically a fraction of the cost of the water damage repairs that result from going without one. It is one of the best-value maintenance investments a chimney owner can make.
Aspen Chimney Service Installs and Replaces Both
We carry chimney caps and chase covers on our trucks and can install or replace them during a standard service visit. If your cap is missing, damaged, or rusted, we will show you what we find and give you a straightforward recommendation.
Call (215) 771-5034 or schedule online. We serve all of Bucks County, seven days a week, 8 AM to 8 PM.
Related reading: 5 signs your chimney needs repair · How often should you have your chimney swept? · White stains on my chimney — what is efflorescence?
Explore Topics
Written by
Aspen Chimney Service
Content creator and writer sharing insights and stories.